Ultimax Buthylacetate
Applications
Ultimax Buthylacetate, GOST 8981-78, is a colorless homogeneous liquid with no turbidity, dehomogenization or suspended particles. Buthylacetate is used in car repairs to prepare working mixtures of 2K acrylic primer fillers, 2K acrylic enamels and varnishes.
Technical characteristics
- Mass fraction of water by Fischer, % - not more than 1
- Volatility (ethyl ether) - 8-14
- Acid value, mg KOH/g - not more than 0.10
- Coagulation concentration, % - not less than 22
- Flash point in a closed cup, C - not lower than 5
- Dilution effect: Coagulation and separation of paintwork materials shall not be observed. After drying there should be no whitening of the film on the surface, as well as whitish or matte spots
Safety and regulation
Use this product in a well-ventilated room, wearing protective gloves. If the solvent comes into contact with the skin, wash it off with plenty of water. If the solvent is spilled on the surface, it is collected with a scoop, then the surface is washed with plenty of water. Keep away from heating appliances and electrical equipment. Keep away from fire.
Request a Sample Ultimax Buthylacetate
Buy