Solvent
Solvent Ultimax 650

Ultimax 650 Solvent is a mixture of aromatic hydrocarbons, ketones, alcohols and esters.

Calculate the cost

Description

Ultimax 650 Solvent is a mixture of aromatic hydrocarbons, ketones, alcohols and esters.

Applications

Ultimax 650 solvent is a multicomponent organic compound that is used to dilute paints and varnishes, as well as to treat and degrease various surfaces. The solvent of this brand belongs to the group of low-volatile solvents and has good dissolving ability with respect to nitrocellulose and nitroglyphthalic coatings. It should be noted that the use of Ultimax 650 solvent, the price of which is very affordable, is possible in auto repair shops and machine-building enterprises, since its chemical composition allows diluting synthetic and nitro-synthetic automotive enamels. This organic solvent is able to most effectively dilute almost all paint and varnish materials giving them the desired viscosity. The material perfectly degreases the surface, which contributes to a better application of paint. Also, Ultimax 650 Solvent can be used as a material for cleaning tools.

Technical characteristics

Ultimax 650 Solvent according to TR 20.30.22-018-75911280-2016 is a colorless or slightly yellowish, homogeneous, transparent liquid without turbidity, delamination and suspended particles.

The solvent Ultimax 650, according to TR 20.30.22-018-75911280-2016, has the following characteristics:

 

Mass fraction of water according to Fisher,%,

not more than - 0.6

Volatility over ethyl ether

8-12

Acid number, mg KOH/g

not more than - 0.06

Coagulation number, %,

not less than - 60

Diluting effect

Should not be observed coagulation and exfoliation of paint. After drying, there should be no whitening of the film on the surface, as well as whitish or dull spots

Flash point in a closed crucible, °С

not lower than- 4

Safety and regulation

Ultimax 650 solvent TR 20.30.22-018-75911280-2016 is a flammable liquid with a characteristic odor, which has a strong irritant effect on the skin, the mucous membrane of the eyes and upper respiratory tract. In this regard, the work with the solvent is carried out in rubber gloves in a well-ventilated area. At hit of solvent on skin wash it off with a large amount of water with soap.